高精度的LiDAR点云配准是实现点云数据整体性和保证空间目标三维表面拓扑重建的关键,本文提出了基于Plücker直线的LiDAR点云配准模型,利用Plücker直线表示LiDAR待配准点云与基准点云间的同名直线,根据同名Plücker直线重合的几何拓扑关系,建立Plücker直线共线条件方程,再用最小二乘法确定待配准LiDAR点云与基准点云间的相对位姿参数。结果表明,Plücker直线共线条件配准模型几何约束性较强,配准精度较高。
The high precision LiDAR point cloud registration is the key to achieve overall point cloud data, in the meantime, to ensure the 3D topological reconstruction of spatial objects. In this paper, a new registration method based on Plücker line is proposed. The conjugate lines between reference point cloud and point cloud to be registered are expressed by Plücker line. Then the collinearity equation based on Plücker line is established by the geometric topology relation of the conjugate lines. Finally the relative position and attitude parameters between reference point cloud and point cloud to be registered are solved by least squares method. Experimental results show that the method has strong geometric constraint and high registration precision.
[1] 张东, 黄腾, 李桂华. 地面LiDAR点云数据先局部后整体配准方法[J]. 测绘工程, 2012, 21(2): 6-8. ZHANG Dong, HUANG Teng, LI Guihua. Registration Method of Terrestrial LiDAR Data from Parts to Whole[J]. Engineering of Surveying Mapping, 2012, 21(2): 6-8.
[2] 陈卓, 马洪超. 基于机载LiDAR数据的大型立交桥三维建模方法[J]. 测绘学报, 2012, 41(2): 252-258. CHEN Zhuo, MA Hongchao. Automatic Extracting and Modeling Approach of City Cloverleaf from Airborne LiDAR Data[J]. Acta Geodaetica et Cartographica Sinica, 2012, 41(2): 252-258.
[3] 方莉娜,杨必胜. 车载激光扫描的三维道路自动提取方法[J]. 测绘学报, 2013, 42(2): 260-267. FANG Lina, YANG Bisheng. Automated Extracting Structural Roads from Moblie Laser Scanning Point Clouds[J]. Acta Geodaetica et Cartographica Sinica, 2013, 42(2): 260-267.
[4] BESL P J, MCKAY N D. A Method for Registration of 3-D Shapes[J]. IEEE Transactions on Pattern Analysis and Machines Intelligence, 1992, 14(2): 239-256.
[5] ROBERT J M P. Theory and Application of Weighted Least Squares Surface Matching for Accurate Spatial Data Registration[D]. Australia: The University of Newcastle, 2004.
[6] ROSENHOLM D, TORLEGARD K. Three-dimensional Absolute Orientation of Stereo Models Using Digital Elevation Models[J]. Photogrammetric Engineering and Remote Sensing, 1988, 54(10): 1385-1389.
[7] 张剑清, 翟瑞芳, 郑顺义. 激光扫描多三维视图的全自动无缝镶嵌[J]. 武汉大学学报(信息科学版), 2007, 32(2): 100-103. ZHANG Jianqing, ZHAI Ruifang, ZHENG Shunyi. Automatic Seamless Registration of 3D Multiple Range Views[J]. Geomatics and Information Science of Wuhan University, 2007, 32(2): 100-103.
[8] 童礼华,程亮,李满春,等. 基于建筑轮廓的车载和航空LiDAR数据配准[J].测绘学报, 2013, 42(5): 699-706, 714. TONG Lihua, CHENG Liang, LI Manchun, et al. Registration of Vehicle and Airborne LiDAR with Building Contours[J]. Acta Geodaetica et Cartographica Sinica, 2013, 42(5): 699-706, 714.
[9] 戴静兰, 陈志杨, 叶修梓. ICP算法在点云配准中的应用[J]. 中国图象图形学报, 2007, 12(3): 517-521. DAI Jinglan, CHEN Zhiyang, YE Xiuzi. The Application of ICP Algorithm in Point Cloud Alignment[J]. Journal of Image and Graphics, 2007, 12(3): 517-521.
[10] 何文峰, 查红彬. 基于平面特征的深度图像配准[C]//中国人工智能进展-中国人工智能学会第10届全国学术年会论文集.北京: 北京邮电大学出版社, 2003:643-648. HE Wengfeng, ZHA Hongbin. Registration of Range Data Based on Planar Features[C]//Advances in Chinese Artificial Intelligence.Beijing: Beijing University of Posts and Telecommunications press, 2003, 643-648.
[11] PARK S Y, SUBBARAO M. An Accurate and Fast Point-to-Plane Registration Technique[J]. Pattern Recognition Letters, 2003, 24(16): 2967-2976.
[12] GUAN Yunlan, ZHANG Hongjun. Initial Registration for Point Clouds Based on Linear Features[C]//Proceedings of 2011 4th International Symposium on Knowledge Acquisition and Modeling.Sanya: IEEE, 2011: 474-477.
[13] 王永波, 杨化超, 刘燕华, 等. 线状特征约束下基于四元数描述的LiDAR点云配准方法[J]. 武汉大学学报(信息科学版), 2013, 38(9): 1057-1062. WANG Yongbo, YANG Huachao, LIU Yanhua, et al. Linear-Feature-Constrained Registration of LiDAR Point Cloud via Quaternion[J]. Geomatics and Information Science of Wuhan University, 2013, 38(9): 1057-1062.
[14] AYACHE N, FAUGERAS O D. Maintaining Representations of the Environment of a Mobile Robot[J]. IEEE Transactions on Robotics and Automation, 1989, 5(6): 804-819.
[15] FUNDA J, TAYLOR R H, PAUL R P. On Homogeneous Transforms, Quaternions, and Computational Efficiency[J]. IEEE Transactions on Robotics and Automation, 1990, 6(3): 382-388.
[16] ZHANG Wenxiang. Plücker Coordinates of Screws and Their Applications in Gear Studies[J]. Journal of Huainan Mining Institute, 1991, 11(1-2): 86-97, 56.
[17] RONDA J I, VALDES A, GALLEGO G. Camera Autocalibration Using Plücker Coordinates[C]//IEEE International Conference on Image Processing 2005. Genova: IEEE, 2005: 3125-3128.
[18] SARIYILDIZ E, TEMELTAS H. Solution of Inverse Kinematic Problem for Serial Robot Using Dual Quaterninons and Plücker Coordinates[C]//Proceedings ofIEEE/ASME International Conference on Advanced Intelligent Mechatronics. Singapore: IEEE, 2009: 338-343.
[19] 李静, 王惠南, 刘海颖. 基于普吕克直线的交会对接相对位姿确定算法[J]. 中国空间科学技术, 2013, 33(1): 69-74. LI Jing, WANG Huinan, LIU Haiying. Plucker Line Based Relative Position and Attitude Determination Algorithm for RVD[J]. Chinese Space Science and Technology, 2013, 33(1): 69-74.
[20] SELIG J M. 机器人学的几何基础[M].杨向东, 译.北京: 清华大学出版社, 2008. SELIG J M. Robotics Foundations of Geometry[M]. YANG Xiangdong, trans.Beijing: Tsinghua University Press, 2008.
[21] CHASLES M. Note sur les Proprietes Generales du Systeme de Deux Corps Semblables Entreux et Places Dune Maniere Quelconque Dans Lespace; et sur le Deplancement Fini ou Infiniment Petit dun Corps Solide Libre[J]. Bulletin des Science Mathematiques, Astronomiques, Physiques et Chimiques, 1830, 14: 321-326.
[22] ROONEY J. A Comparison of Representations of General Spatial Screw Displacement[J]. Environment and Planning B Planning and Design, 1978, 5(1): 45-88.
[23] LASENBY J, FITZGERALD W J, LASENBY A N, et al. New Geometric Methods for Computer Vision: An Application to Structure and Motion Estimation[J]. International Journal of Computer Vision, 1998, 26(3): 191-213.
