工业摄影测量技术发展与应用

doi:10.11947/j.AGCS.2022.20220064

测绘学报 ›› 2022, Vol. 51 ›› Issue (6): 843-853.doi: 10.11947/j.AGCS.2022.20220064

工业摄影测量技术发展与应用

张祖勋¹, 郑顺义^1,2, 王晓南²

1. 武汉大学遥感信息工程学院, 湖北武汉 430079;
2. 武汉中观自动化科技有限公司, 湖北武汉 430070

收稿日期:2022-01-26 修回日期:2022-03-28 发布日期:2022-07-02
通讯作者: 郑顺义 E-mail:syzheng@whu.edu.cn
作者简介:张祖勋(1937-),男,教授,博士生导师,中国工程院院士,研究方向为数字摄影测量与遥感。E-mail:zhangzx@cae.cn

Development and application of industrial photogrammetry technology

ZHANG Zuxun¹, ZHENG Shunyi^1,2, WANG xiaonan²

1. School of Remote Sensing and Information Engineering, Wuhan University, Wuhan 430079, China;
2. ZG Technology Co., Ltd., Wuhan 430070, China

Received:2022-01-26 Revised:2022-03-28 Published:2022-07-02

摘要/Abstract

摘要： 在制造业朝着自动化、柔性化、智能化发展的潮流中,传统的工业测量技术难以同时胜任高精度、高效率、高便捷性的要求,本文提出以工业摄影测量技术为基础的测量系统,其具有实时性、便捷性、自动化和智能化的特点,获取的高质量的三维数据,可用于逆向工程、质量检测、辅助智能制造等典型工业应用场景。同时介绍了该测量系统的技术路线,从硬件设计、算法优化等方面提出了见解。

关键词: 工业测量, 工业摄影测量, 逆向工程, 质量检测, 智能制造

Abstract: In the trend of automation, flexibility and intelligence in the manufacturing industry, traditional industrial measurement technology is difficult to meet the requirements of high precision, high efficiency and high convenience at the same time. This paper proposes a measurement system based on industrial photogrammetry technology, has the characteristics of real-time, convenience, automation and intelligence. The high-quality 3D data obtained by it can be used in typical industrial application scenarios such as reverse engineering, quality inspection, and auxiliary intelligent manufacturing. This paper also introduces the technical route of the measurement system, and puts forward new insights from the aspects of hardware design and algorithm optimization.

Key words: industrial measurement, industrial photogrammetry, reverse engineering, quality inspection, intelligent manufacturing

中图分类号:

P227

张祖勋, 郑顺义, 王晓南. 工业摄影测量技术发展与应用[J]. 测绘学报, 2022, 51(6): 843-853.

ZHANG Zuxun, ZHENG Shunyi, WANG xiaonan. Development and application of industrial photogrammetry technology[J]. Acta Geodaetica et Cartographica Sinica, 2022, 51(6): 843-853.

参考文献

[1] 冯文灏. 工业测量[M]. 武汉:武汉大学出版社, 2004. FENG Wenhao. Industrial measurement[M]. Wuhan:Wuhan University Press, 2004.
[2] 李明, 于冀平. 几何量工业测量的现状与发展[J]. 仪器仪表学报, 2017, 38(12):2959-2971. LI Ming, YU Jiping. Status and development of geometric measurement in industry[J]. Chinese Journal of Scientific Instrument, 2017, 38(12):2959-2971.
[3] 何学军. 几何量数字化测量方法与装备的现状及发展趋势[J]. 计测技术, 2021, 41(2):35-40. HE Xuejun. Present situation and development trend of geometric digital measurement method and measuring equipment[J]. Metrology & Measurement Technology, 2021, 41(2):35-40.
[4] BÖSEMANN W. Industrial photogrammetry:challenges and opportunities[C]//Proceedings of 2011 SPIE Volume 8085, Videometrics, Range Imaging, and Applications XI. Munich, Germany:SPIE, 2011.
[5] BÖSEMANN W. Industrial photogrammetry-accepted metrology tool or exotic niche[J]. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 2016, XLI-B5:15-24.
[6] 黄桂平. 数字近景工业摄影测量理论、方法与应用[M]. 北京:科学出版社, 2016. HUANG Guiping. Theory, method and application of digital close range industrial photogrammetry[M]. Beijing:Science Press, 2016.
[7] BURGE J H, SU Peng, ZHAO Chunyu, et al. Use of a commercial laser tracker for optical alignment[C]//Proceedings of 2007 SPIE Volume 6676, Optical System Alignment and Tolerancing. San Diego, California:SPIE, 2007.
[8] 黄祚继, 钱海明, 张蕊, 等. 近景摄影测量影像匹配方法研究与应用[M]. 南京:河海大学出版社, 2017. HUANG Zuoji, QIAN Haiming, ZHANG Rui, et al. Research and application of close range photogrammetry image matching method[M]. Nanjing:Hehai University Press, 2017.
[9] 张祖勋. 数字摄影测量与计算机视觉[J]. 武汉大学学报(信息科学版), 2004, 29(12):1035-1039, 1105. ZHANG Zuxun. Digital photogrammetry and computer vision[J]. Geomatics and Information Science of Wuhan University, 2004, 29(12):1035-1039, 1105.
[10] 王文颖. 工程与近景摄影测量[M]. 北京:地质出版社, 1994. WANG Wenying. Engineering and close range photogram-metry[M]. Beijing:Geological Publishing House, 1994.
[11] 丁宭辋, 刘友光, 张松波. 工程与工业摄影测量[M]. 武汉:中国地质大学出版社, 1995. DING Qunwang, LIU Youguang, ZHANG Songbo. Engineering and industrial photogrammetry[M]. Wuhan:China University of Geosciences Press, 1995.
[12] 郑顺义, 何源, 徐刚, 等. 三维点云数据实时管理的Hash map方法[J]. 测绘学报, 2018, 47(6):825-832. DOI:10.11947/j.AGCS.2018.20170619. ZHENG Shunyi, HE Yuan, XU Gang, et al. Hash map method of 3D point cloud data for real-time organizing[J]. Acta Geodaetica et Cartographica Sinica, 2018, 47(6):825-832. DOI:10.11947/j.AGCS.2018.20170619.
[13] HE Yuan, ZHENG Shunyi, ZHU Fengbo, et al. Real-time 3D reconstruction of thin surface based on laser line scanner[J]. Sensors, 2020, 20(2):534.
[14] MEYNANTS G. Global shutter imagers for industrial applications[C]//Proceedings of 2014 SPIE. Volume 9141, Optical Sensing and Detection III. Brussels, Belgium:SPIE, 2014.
[15] HUBBS W O. Refurbishable retro-reflective photogrammetric target:United States, 7698826[P]. 2008-01-28.
[16] LEPETIT V, MORENO-NOGUER F, FUA P. EPnP:An accurate O(n) solution to the PnP problem[J]. International Journal of Computer Vision, 2009, 81:155.
[17] SANTOS P, STORK A, BUAES A, et al. PTrack:Introducing a novel iterative geometric pose estimation for a marker-based single camera tracking system[C]//Proceedings of 2006 IEEE Virtual Reality Conference (VR 2006). Alexandria, VA, USA:IEEE, 2006:143-150.
[18] WU Qian, LU Jinyan, ZOU Wei, et al. Path planning for surface inspection on a robot-based scanning system[C]//Proceedings of 2015 IEEE International Conference on Mechatronics and Automation (ICMA). Beijing, China:IEEE, 2015:2284-2289.
[19] 冯其强, 李广云, 李宗春. 数字工业摄影测量技术及应用[M]. 北京:测绘出版社, 2013. FENG Qiqiang, LI Guangyun, LI Zongchun. Digital industrial photogrammetry technology and application[M]. Beijing:Surveying and Mapping Press, 2013.
[20] 顾文文. 基于逆向工程的船舶曲面数字化设计方法研究[D]. 大连:大连理工大学, 2019. GU Wenwen. Research on digital design method of ship surface based on reverse engineering[D]. Dalian:Dalian University of Technology, 2019.
[21] 戚明轩, 刘震磊, 兆尔波, 等. 某型航空发动机叶片逆向工程方法研究[J]. 航空精密制造技术, 2021, 57(1):13-16. QI Mingxuan, LIU Zhenlei, ZHAO Erbo, et al. Research on reverse engineering method of aeroengine blade[J]. Aviation Precision Manufacturing Technology, 2021, 57(1):13-16.
[22] 丁骏. 重型燃气轮机高负荷压气机气动设计方法及流动控制机理[D]. 哈尔滨:哈尔滨工业大学, 2018. DING Jun. On the aerodynamic design method and flow control mechanism of highly loaded compressors in a heavy duty gas turbine[D]. Harbin:Harbin Institute of Technology, 2018.
[23] 彭燕军, 王霜, 彭小欧. UG、Imageware在逆向工程三维模型重构中的应用研究[J]. 机械设计与制造, 2011(5):85-87. PENG Yanjun, WANG Shuang, PENG Xiaoou. Applied research of UG and Imageware in 3-D model reconstruction of reverse engineering[J]. Machinery Design & Manufacture, 2011(5):85-87.
[24] 徐进军. 工业测量技术与数据处理[M]. 武汉:武汉大学出版社, 2014. XU Jinjun. Industrial measurement technology and data processing[M]. Wuhan:Wuhan University Press, 2014.
[25] JORDAN M. Scanner enables fast, flexible inspection[J]. Modern Machine Shop, 2009, 81(12):100-103.
[26] CHEN Jiaying, HUANG Xiaoming, ZHENG Binshuang, et al. Real-time identification system of asphalt pavement texture based on the close-range photogrammetry[J]. Construction and Building Materials, 2019, 226:910-919.
[27] QIN Chen, GAN Yahui, DAI Xianzhong. Sensor calibration and trajectory planning in 3D vision-guided robots[C]//Proceedings of 2019 Chinese Control and Decision Conference (CCDC). Nanchang, China:IEEE, 2019:5621-5626.

工业摄影测量技术发展与应用

Development and application of industrial photogrammetry technology

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价