测绘学报 ›› 2015, Vol. 44 ›› Issue (10): 1071-1077.doi: 10.11947/j.AGCS.2015.20140290

• 大地测量学与导航 • 上一篇    下一篇

斜轴变形椭球高斯投影方法

边少锋1, 刘强1,2, 李忠美1, 李厚朴1   

  1. 1. 海军工程大学导航工程系, 湖北 武汉 430033;
    2. 海军驻天津地区航保军事代表室, 天津 300042
  • 收稿日期:2014-06-11 修回日期:2015-05-29 出版日期:2015-10-20 发布日期:2015-10-23
  • 通讯作者: 刘强,E-mail:Naboy-liuqiang@163.com E-mail:Naboy-liuqiang@163.com
  • 作者简介:边少锋(1961—),男,教授,研究方向为大地测量、地图投影及卫星导航.E-mail:sfbian@sina.com
  • 基金资助:
    国家自然科学基金(41201478;41574009)

An Alteration of Gauss Projection Based on Oblique Deformed Ellipsoid

BIAN Shaofeng1, LIU Qiang1,2, LI Zhongmei1, LI Houpu1   

  1. 1. Department of Navigation, Naval University of Engineering, Wuhan 430033, China;
    2. Military Delegate Office of Naval Navigation Guarantee, Tianjin 300042, China
  • Received:2014-06-11 Revised:2015-05-29 Online:2015-10-20 Published:2015-10-23
  • Supported by:
    The National Natural Science Foundation of China (Nos.41201478;41574009)

摘要: 针对东西跨度较大的线路,借助最小二乘法建立斜轴参考椭球,以减小高斯投影横坐标;通过坐标系转换理论,推导出测区在各坐标系下的空间直角坐标,进而确定测区相对于斜轴参考椭球上的大地坐标;利用椭球变换法建立斜轴变形椭球以减小因高程引起的投影变形.以某铁路线为例,可知"斜轴变形椭球高斯投影方法"可大大减小投影后横轴方向分量,避免高斯投影分带现象,同时有效减小高程及其引起的投影变形.该方法数学模型严谨、运算过程清晰,便于编制相关软件,可投入工程使用.

关键词: 高斯投影, 斜轴变形椭球, 最小二乘法, 坐标系转换, 椭球变形法

Abstract: For east-west spanning line, to reduce abscissa value of Gauss projection, the oblique reference ellipsoid was constructed by means of least square method. Via theory of coordinate system transformation, spatial rectangular coordinates of target region in each coordinate system were carried out, and then geodetic coordinates of target region on oblique reference ellipsoid were relatively given. Through ellipsoid transformation, oblique deformed ellipsoid was established to lessen distortion of projection caused by height. Taking one railway for example, it were shown that "An alteration of Gauss projection based on oblique deformed ellipsoid" could greatly deplete abscissa components, avoid zoning of Gauss projection and reduce height effectively, as well as the relevant distortion it caused. Strict mathematical model and clear operation process of the Gauss projection are convenient for programming of relative software, which can be applied in engineering.

Key words: Gauss projection, oblique deformed ellipsoid, least square method, coordinate system transformation, ellipsoid deformation method

中图分类号: