天绘二号卫星两种基线定标模型比较分析

doi:10.11947/j.AGCS.2022.20210316

摘要/Abstract

摘要： 天绘二号卫星系统中两颗对等的卫星于2019年7月初形成绕飞编队,采用一发双收体制获取全球雷达干涉数据,精确的干涉基线是实现高精度测绘产品生产的前提。本文给出了主雷达APC坐标系中的基线定义,介绍了一发双收体制下,基于辅雷达距离改化方程和多普勒方程的单景数据基线定标模型和平行基线误差、有效基线误差分步求解的近远波位联合基线定标模型。根据基线误差交会原理给出了控制点选取策略,即在近、远距端子条带内选取控制点的策略。利用天绘二号获取的17次新疆定标场数据开展了单景数据基线定标和近远波位联合基线定标试验,并对两种基线定标模型定标后的地面定位精度进行了分析。结果表明:单景数据模型标出的水平基线误差均值为-2.74mm,垂直基线误差均值为-5.49mm,近远波位联合模型标出的水平基线误差均值为-1.95mm,垂直基线误差均值为-5.84mm,近远波位联合基线定标后比单景数据基线定标后系统地面定位精度高。

关键词: 干涉合成孔径雷达, 天绘二号, 基线定标, 定位精度

Abstract: The two equivalent satellites in the TH-2 satellite system formed a flying-around formation in early July 2019, and began to obtain global radar interference data using the one-transmit and double-receiving system. The precise interference baseline is to realize the production of high-precision surveying and mapping products. This article gives the definition of the baseline in the antenna phase center (APC) coordinate system of the main radar. It introduces the single-scene data baseline calibration model based on the slave radar range modification equation and doppler equation under the one-transmit and double-receiving system, and a joint near-far beam positions calibration model of obtaining parallel and effective baseline errors by steps. According to the principle of baseline error intersection, a control points selection strategy is given, that is, the strategy of selecting control points in the near and far sub strips. The 17 times Xinjiang calibration field data acquired by TH-2 was used to carry out single-scene data and near-far beam positions joint baseline calibration experiments, and the ground positioning precision analysis of the two baseline calibration models after calibration was carried out. The experiments show that the average horizontal baseline error is -2.74mm, and the average vertical baseline error is -5.49mm calibrated by the single-scene data model. The average horizontal baseline error is -1.95mm, and the average vertical baseline error is -5.84mm calibrated by the near-far beam positions joint model. The ground positioning precision of the system after the near-far beam positions joint baseline calibration is higher than that of the single-scene data baseline calibration.

Key words: interferometric synthetic aperture radar, TH-2, baseline calibration, positioning precision

中图分类号:

P237

钱方明, 陈刚, 楼良盛, 刘薇, 张昊, 孟欣. 天绘二号卫星两种基线定标模型比较分析[J]. 测绘学报, 2022, 51(12): 2425-2432.

QIAN Fangming, CHEN Gang, LOU Liangsheng, LIU Wei, ZHANG Hao, MENG Xin. Comparison and analysis of two baseline calibration models for TH-2 satellite[J]. Acta Geodaetica et Cartographica Sinica, 2022, 51(12): 2425-2432.

参考文献

[1] 楼良盛, 刘志铭, 张昊, 等. 天绘二号卫星工程设计与实现[J]. 测绘学报, 2020, 49(10):1252-1264. DOI:10.11947/j.AGCS.2020.20200175. LOU Liangsheng, LIU Zhiming, ZHANG Hao, et al. TH-2 satellite engineering design and implementation[J]. Acta Geodaetica et Cartographica Sinica, 2020, 49(10):1252-1264. DOI:10.11947/j.AGCS.2020.20200175.
[2] 楼良盛, 汤晓涛. 星载InSAR系统构型简介[J]. 测绘科学与工程, 2004, 24(3):56-59. LOU Liangsheng, TANG Xiaotao. Brief introduction on the formations of spaceborne InSAR system[J]. Geomatics Science and Engineering, 2004, 24(3):56-59.
[3] TU Jia, GU Defeng, WU Yi, et al. Error modeling and analysis for InSAR spatial baseline determination of satellite formation flying[J]. Mathematical Problems in Engineering, 2012, 2012:140301.
[4] MONTENBRUCK O, WERMUTH M, KAHLE R. GPS based relative navigation for the TanDEM-X mission-first flight results[J]. Navigation, 2011, 58(4):293-304.
[5] ARDAENS J S, D'AMICO S. Spaceborne autonomous relative control system for dual satellite formations[J]. Journal of Guidance, Control, and Dynamics, 2009, 32(6):1859-1870.
[6] 鞠冰, 昌虓, 谷德峰, 等. 质心误差对分布式InSAR基线确定的影响及消除[J]. 遥感学报, 2017, 21(4):558-565. JU Bing, CHANG Xiao, GU Defeng, et al. Analysis and mitigation of the center-of-mass errors for InSAR baseline determination[J]. Journal of Remote Sensing, 2017, 21(4):558-565.
[7] 陈刚, 钱方明, 楼良盛. 分布式InSAR基线定标算法[J]. 测绘科学与工程, 2016, 36(4):27-32. CHEN Gang, QIAN Fangming, LOU Liangsheng. Baseline calibration algorithm for distributed-InSAR[J]. Geomatic Science and Engineering, 2016, 36(4):27-32.
[8] ANTONY J W, GONZALEZ J H, SCHWERDT M, et al. Results of the TanDEM-X baseline calibration[J]. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 2013, 6(3):1495-1501.
[9] 钱方明, 姜挺, 楼良盛, 等. 星载分布式InSAR基线定标新方法[J]. 武汉大学学报(信息科学版):2020, 45(1):126-133. QIAN Fangming, JIANG Ting, LOU Liangsheng, et al. A new method of space-borne distributed InSAR baseline calibration[J]. Geomatics and Information Science of Wuhan University, 2020, 45(1):126-133.
[10] SMALL D, WERNER C, NUESCH D. Baseline modelling for ERS-1 SAR interferometry[C]//Proceedings of IGARSS'93-IEEE International Geoscience and Remote Sensing Symposium. Tokyo, Japan:IEEE, 1993:1204-1206.
[11] KNEDLIK S, LOFFELD O. Baseline estimation and prediction referring to the SRTM[C]//Proceedings of International Geoscience and Remote Sensing Symposium. Toronto, ON, Canada:IEEE, 2002:161-163.
[12] ZINK M, GEUDTNER D. Calibration of the interferometric X-SAR system on SRTM[C]//Proceedings of IEEE 2019 International Geoscience and Remote Sensing Symposium. IGARSS'99(Cat. No.99CH36293). Hamburg, Germany:IEEE, 1999:227-229.
[13] COSTANTINI M, MINATI F, QUAGLIARINI A, et al. SAR interferometric baseline calibration without need of phase unwrapping[C]//Proceedings of 2004 IEEE International Geoscience and Remote Sensing Symposium. Anchorage, AK, USA:IEEE, 2004:493-495.
[14] 刘国祥. 利用雷达干涉技术监测区域地表形变[M]. 北京:测绘出版社, 2006:68-88. LIU Guoxiang. Monitoring of ground deformations with radar interferometry[M]. Beijing:Surveying and Mapping Press, 2006:68-88.
[15] 李品. InSAR系统的定标方法研究[D]. 合肥:中国科学技术大学, 2008. LI Pin. Research on calibration method for InSAR system[D]. Hefei:University of Science and Technology of China, 2008.
[16] 何秀凤, 何敏. InSAR对地观测数据处理方法与综合测量[M]. 北京:科学出版社, 2012:63-65. HE Xiufeng, HE Min. InSAR earth observation data processing method and comprehensive measurement[M] Beijing:Science Press, 2012:63-65.
[17] 吴丹芹. 机载/星载InSAR定标模型与方法[D]. 成都:西南交通大学, 2017. WU Danqin. Modeling and methodology for airborne and spaceborne InSAR calibration[D]. Chengdu:Southwest Jiaotong University, 2017.
[18] GONZALEZ J H, BACHMANN M, KRIEGER G, et al. Development of the TanDEM-X calibration concept:analysis of systematic errors[J]. IEEE Transactions on Geoscience and Remote Sensing, 2010, 48(2):716-726.
[19] BACHMANN M, GONZALEZ J H, KRIEGER G, et al. Calibration of the bistatic TanDEM-X interferometer[C]//Proceedings of the 9th European Conference on Synthetic Aperture Radar. Nuremberg, Germany:VDE, 2012:97-100.
[20] 楼良盛, 汤晓涛, 牛瑞. 基于卫星编队InSAR空间同步对系统性能影响的分析[J]. 武汉大学学报(信息科学版):2007, 32(10):892-894. LOU Liangsheng, TANG Xiaotao, NIU Rui. Analysis of influence on system performance from InSAR space synchronization based on formation satellites[J]. Geomatics and Information Science of Wuhan University, 2007, 32(10):892-894.
[21] GONZÁLEZ J H, ANTONY J M W, BACHMANN M, et al. Bistatic system and baseline calibration in TanDEM-X to ensure the global digital elevation model quality[J]. ISPRS Journal of Photogrammetry and Remote Sensing, 2012, 73:3-11.
[22] TANG Xinming, LI Tao, GAO Xiaoming, et al. Research on key technologies of precise InSAR surveying and mapping applications using automatic SAR imaging[J]. Journal of Geodesy and Geoinformation Science, 2019, 2(2):27-37. DOI:10.11947/j.JGGS.2019.0204.
[23] 钱方明, 陈刚, 刘薇, 等. 星载分布式InSAR基线定标场范围确定方法[J]. 测绘科学与工程, 2018, 38(4):37-41. QIAN Fangming, CHEN Gang, LIU Wei, et al. Range determining for baseline calibration field of spaceborne distributed InSAR[J]. Geomatics Science and Engineering, 2018, 38(4):37-41.
[24] QIAN Fangming, CHEN Gang, LU Jun, et al. Correcting method of slant-range error for the TH-2 satellites[J]. Remote Sensing Letters, 2021, 12(2):142-149.
[25] 隋立芬, 宋力杰, 柴洪洲, 等. 误差理论与测量平差基础[M]. 2版. 北京:测绘出版社, 2016:11-12. SUI Lifen, SONG Lijie, CHAI Hongzhou, et al. Error theory and foundation of surveying adjustment[M]. 2nd ed. Beijing:Surveying and Mapping Press, 2016:11-12.