A Space Resection Synthetic the Multiple Features

Abstract

Abstract:

In order to resolve the current problems of Space Resection caused by lacking of obvious feature points in applications of photogrammetry, computer vision field, a new method of Space Resection based on the generalized point photogrammetry theory is proposed, put forward by using horizontal and vertical line, line segment and circle, the mathematics model of the method and its application range are discussed. Simulated and real experimental results show that the proposed approach is feasible in practice, and can greatly reduce the dependence of traditional resection method on feature points, and the introduction of the redundant observation value can also improve the accuracy and stability of the calculation results to a certain extent.

Key words: space resection, generalized point photogrammetry, multiple features, straight line, circular curves

CLC Number:

TP391

References

[1] WANG Zhi-zuo. Principles of Photogrammetry[M]. Beijing:Publishing House of Surveying and mapping, 1979. (王之卓. 摄影测量原理[M]. 北京:测绘出版社,1979)
[2] JIN Wei-xian, YANG Xian-hong, SHAO Hongchao, et al. Photogrammetry[M]. Wuhan: Wuhan University Press, 2006. (金为铣, 杨先宏, 邵鸿潮, 等. 摄影测量学[M]. 武汉:武汉大学出版社, 1996)
[3] GUAN Yun-lan, ZHOU Shi-jian, ZHOU Ming, et al. Improved Algorithm of Spatial Resection Based on Pyramid[J]. Science of Surveying and Mapping, 2006, 31(2): 27-28. (官云兰, 周世健, 周铭, 等. 基于角锥体原理的空间后方交会改进算法[J]. 测绘科学, 2006, 31(2): 27-28.)
[4] Haralick B M, Lee C N, Ottenberg K, et al. Review and analysis of solutions of the three point perspective pose estimation problem[J]. International Journal of Computer Vision, 1994, 13(3): 331-356.
[5] HARTLEY R, ZISSERMAN A, EBRARY I. Multiple view geometry in computer vision [M]. Cambridge: Cambridge Univ Press, 2003.
[6] FENG Wen-hao. Close shot photogrammetry [M]. Wuhan: Wuhan University Press, 2002. (冯文灏. 近景摄影测量 [M]. 武汉: 武汉大学出版社, 2002.)
[7] JIANG Gang-wu, JIANG Ting, WANG Yong, et al. Space Resection Independent of initial Value Based on Unit Quaternions [J]. Acta Geodaetice et Cartographica Sinica, 2007, 36(2) :169-175. (江刚武, 姜挺, 王勇, 等. 基于单位四元数的无初值依赖空间后方交会[J]. 测绘学报, 2007, 36(2): 169-175.)
[8] Shoemake K. Animating rotation with quaternion curves[J]. ACM SIGGRAPH computer graphics, 1985, 19(3): 245-254.
[9] GONG Hui, JIANG Ting, JIANG Gang-wu, et al. A Globally Convergent Algorithm of Space Resection Based on Quaternion[J]. Acta Geodaetice et Cartographica Sinica, 2011, 40(5): 639-645.(龚辉, 姜挺, 江刚武, 等. 一种基于四元数的空间后方交会全局收敛方法[J]. 测绘学报, 2011, 40(5): 639-645).
[10] GUAN Yun-lan, CHEN Xiao-jun, ZHOU Shi-jian, et al. A Solution to Space Resection Based on Unit Quaternion [J]. Acta Geodaetice et Cartographica Sinica, 2008, 37(1): 30-35.(官云兰, 程效军, 周世健, 等. 基于单位四元数的空间后方交会解算[J]. 测绘学报, 2008, 37(1): 30-35.)
[11] ZHANG Zu-xun, ZHANG Jian-qing. Generalized Point Photogrammetry and Its Application[J]. Geomatics and Information Science of Wuhan University , 2005, 30(001): 1-5. (张祖勋, 张剑清. 广义点摄影测量及其应用[J]. 武汉大学学报: 信息科学版, 2005, 30(001): 1-5.)
[12] ZHANG Zu-xun, ZHANG Yong. Study of the Vertical Lines Supported Aerial Triangulation over Urban Areas[J] Geomatics and Information Science of Wuhan University, 2007, 32(8): 659-662.(张祖勋, 张勇. 城区铅垂线辅助空中三角测量研究[J]. 武汉大学学报: 信息科学版, 2007, 32(8): 659-662.)
[13] ZHANG Jian-qing, Zhang Yong, Zhang Fang. Absolute Orientation of Aerial Imagery Over Urban Areas Combined with Vertical Lines [J]. Geomatics and Information Science of Wuhan University, 2007, 32(3): 197-200.( 张剑清, 张勇, 方芳. 铅垂线辅助城区航空影像的绝对定向 [J]. 武汉大学学报: 信息科学版, 2007, 32(3): 197-200.)
[14] ZHANG Yong-jun, HU Bing-hua, ZHANG Jian-qing. Relative Orientation Based on Multiple Conjugate Features [J]. ACM SIGGRAPH computer graphics, 2011, 40(2): 194-199(张永军, 胡丙华, 张剑清. 基于多种同名特征的相对定向方法研究 [J]. 测绘学报, 2011, 40(2): 194-199.)
[15] ZHANG Y, Hu B, Zhang J. Relative orientation based on multi-features[J]. ISPRS Journal of Photogrammetry and Remote Sensing, 2011, 66(5): 700-707.
[16] ZHANG Yong-jun. Reconstruction of circles and round Rectangles by generalized point photogrammetry[J]. Journal of Harbing Institute of Technology, 2008, 40(1): 36-39.(张永军. 基于广义点摄影测量的圆和圆角矩形三维重建[J]. 哈尔滨工业大学学报, 2008, 40(1): 36-39.)
[17] ZHEN Shun-yi, GUO Bao-yun, LI Cai-lin. 3D Reconstruction and Inspection of Cylinder Based on Geometric Model and Generalized Point Photogrammetry[J]. ACM SIGGRAPH computer graphics, 2011, 40(4): 477-482.(郑顺义, 郭宝云, 李彩林. 基于模型和广义点摄影测量的圆柱体自动三维重建与检测[J]. 测绘学报, 2011, 40(4): 477-482.)
[18] TANG Min, ZHANG Zu-xun, ZHANG Jian-qing. 3D Reconstruction and Inspection of Industrial Sheet Metal Parts with Multiple Baseline Images Based on Generalized Point Photogrammetry Theory. Geomatics and Information Science of Wuhan University, 2007, 32(12): 1095-1098.(唐敏, 张祖勋, 张剑清. 基于广义点理论的多基线影像钣金件 3D 重建与尺寸检测[J]. 武汉大学学报: 信息科学版, 2007, 32(12): 1095-1098. )
[19] SUI Li-feng, SONG Li-jian, CHAI Hong-zhou. Error theory and measurement adjustment basis[M]. Beijing:People's Liberation Army Publishing House, 2004.(隋立芬, 宋力杰, 柴洪洲. 误差理论与测量平差基础 [M]. 北京:测绘出版社, 2010.)
[20] LI De-ren, YUAN Xiu-xiao. Error Processing and Reliability Theory[M]. Wuhan: Wuhan University Press, 2002.(李德仁, 袁修孝. 误差处理与可靠性理论[M]. 武汉: 武汉大学出版社, 2002. )