测绘学报 ›› 2026, Vol. 55 ›› Issue (10): 1744-1755.doi: 10.11947/j.AGCS.2026.20260172

• 大地测量学与导航 • 上一篇    下一篇

一种背景场约束的GNSS快速水汽层析方法

赵庆志1(), 薛瑞瑞1, 马永杰1, 姚宜斌2, 韩钦达1, 李浩杰1   

  1. 1.西安科技大学测绘科学与技术学院,陕西 西安 710054
    2.武汉大学测绘学院,湖北 武汉 430079
  • 收稿日期:2026-05-22 修回日期:2026-10-13 出版日期:2026-11-16 发布日期:2026-11-16
  • 作者简介:赵庆志(1989—),男,博士,教授,研究方向为GNSS数据处理及其创新应用。E-mail:zhaoqingzhia@163.com
  • 基金资助:
    陕西省自然科学基础研究计划重点项目(2026JC-YXQN-107);西安市科技计划项目(26SFJS00001);国家自然科学基金(42574045; 42274039)

A GNSS rapid water vapor tomography method with background field constraints

Qingzhi Zhao1(), Ruirui Xue1, Yongjie Ma1, Yibin Yao2, Qinda Han1, Haojie Li1   

  1. 1.College of Geomatics, Xi'an University of Science and Technology, Xi'an 710054, China
    2.School of Geodesy and Geomatics, Wuhan University, Wuhan 430079, China
  • Received:2026-05-22 Revised:2026-10-13 Online:2026-11-16 Published:2026-11-16
  • About author:Zhao Qingzhi (1989—), male, PhD, professor, majors in GNSS data processing and its innovative application. E-mail: zhaoqingzhia@163.com
  • Supported by:
    Shaanxi Provincial Natural Science Basic Research Program(2026JC-YXQN-107);Xi'an Science and Technology Program Projects(26SFJS00001);The National Natural Science Foundation of China(42574045; 42274039)

摘要:

GNSS水汽层析技术凭借高精度、全天候、高分辨率等优势,逐步成为探测三维水汽信息的重要手段。然而,现有研究中约束方程的引入导致层析模型经验性过强与系统偏差等难题,显著增加了模型复杂程度与解算时间,难以满足实时高精度水汽层析的现实需求。针对该现状,本文提出了一种背景场约束的GNSS快速水汽层析方法,该方法引入数值天气预报产品计算层析区域水汽背景场,构建单位水汽密度修正因子对射线穿过网格的水汽背景场快速修正,并利用水汽密度变化的连续特性对未被射线穿过网格的水汽密度进行改正,实现高质量的三维水汽反演。试验选取香港地区2015年7月21日—2015年7月26日(降雨时段)及2015年8月2日—2015年8月6日(非降雨时段)共11天13个GNSS测站、1个无线电探空站和ERA5数据对本文方法进行验证。与现有层析方法对比,以探空数据为真值,发现本文方法反演的水汽密度在降雨和非降雨时段的平均改善率分别为31.2%和33.3%;以ERA5计算的SWV为真值,本文方法在降雨和非降雨时段反演SWV精度的平均改善率分别为47.2%和57.7%;在模型解算效率方面,本文方法的平均解算时间缩短了20.2%。

关键词: 水汽层析技术, GNSS, 水汽密度, 无线电探空站, 背景场约束

Abstract:

GNSS water vapor tomography technology, with its advantages of high accuracy, all-weather operation, and high resolution, has gradually become an important technique for retrieving three-dimensional atmospheric water vapor. However, existing methods that rely on additional constraint equations often suffer from overly empirical formulations, potential systematic biases, and increased model complexity and computational cost, which limit their applicability to real-time high-accuracy tomography. To address these issues, this study proposes a GNSS rapid water vapor tomography method with background field constraints. This method introduces numerical weather prediction products to calculate the water vapor background field in the tomography area, constructs a unit water vapor density correction factor to rapidly correct the water vapor background field through which the rays pass, and utilizes the continuous characteristics of water vapor density changes to correct the water vapor density of the grids not passed by the ray, achieving high-quality three-dimensional water vapor inversion. Experiments were conducted using data from 13 GNSS stations, one radiosonde station, and ERA5 reanalysis over the Hong Kong region during 11 days, including a rainy period (July 21—26, 2015) and a non-rainy period (August 2—6, 2015). Compared with existing tomographic methods and using radiosonde data as the ground truth, the proposed method achieves average improvement rates of 31.2% and 33.3% in water vapor density inversion during rainy and non-rainy periods, respectively. When using ERA5-derived slant water vapor (SWV) as the reference, the proposed method yields average improvement rates of 47.2% and 57.7% in SWV inversion accuracy for rainy and non-rainy periods, respectively. In terms of computational efficiency, the average solution time of the proposed method is reduced by 20.2%.

Key words: water vapor tomography technology, GNSS, water vapor density, radiosonde station, background field constraints

中图分类号: