[1] 李广云, 李宗春. 工业测量系统原理与应用[M]. 北京:测绘出版社, 2011. LI Guangyun, LI Zongchun. The principles and applications of industrial measuring systems[M]. Beijing:Surveying and Mapping Press, 2011. [2] 曾安敏, 张丽萍, 吴富梅, 等. XAS80到CGCS2000坐标转换的自适应拟合推估算法[J]. 武汉大学学报(信息科学版), 2012, 37(12):1434-1437. ZENG Anmin, ZHANG Liping, WU Fumei, et al. Adaptive collocation method to coordinate transformation from XAS80 to CGCS2000[J]. Geomatics and Information Science of Wuhan University, 2012, 37(12):1434-1437. [3] 李博峰, 沈云中, 李微晓. 无缝三维基准转换模型[J]. 中国科学:地球科学, 2012, 42(7):1047-1054. LI Bofeng, SHEN Yunzhong, LI Weixiao. The seamless model for three-dimensional datum transformation[J]. Science China Earth Sciences, 2012, 55(12):2099-2108. [4] 蔡国柱, 满开第, 张小奇, 等. SA综合测量软件在兰州重离子加速器准直测量中的应用[J]. 测绘科学, 2013, 38(4):162-163, 212. CAI Guozhu, MAN Kaidi, ZHANG Xiaoqi, et al. A combined application of spatial analyzer in alignment and survey of Hirfl-CSR[J]. Science of Surveying and Mapping, 2013, 38(4):162-163, 212. [5] YUAN Jiandong, HE Yuan, ZHANG Bin, et al. Alignment of beam position monitors in cryomodule of CADS injector II[J]. Nuclear Science & Techniques, 2017, 28(6):75. [6] 蔡国柱. 大型离子加速器先进准直安装方法研究[D]. 北京:中国科学院大学, 2014. CAI Guozhu. Research on alignment and installation of large ion accelerator[D]. Beijing:University of Chinese Academy of Sciences, 2014. [7] 李宗春, 李广云, 金超. 面天线检测数据处理方法的探讨[J]. 宇航计测技术, 2003, 23(2):12-19. LI Zongchun, LI Guangyun, JIN Chao. On the data processing methods of surface antenna's calibration[J]. Journal of Astronautic Metrology and Measurement, 2003, 23(2):12-19. [8] 李广云, 范百兴. 精密工程测量技术及其发展[J]. 测绘学报, 2017, 46(10):1742-1751. LI Guangyun, FAN Baixing. The development of precise engineering surveying technology[J]. Acta Geodaetica et Cartographica Sinica, 2017, 46(10):1742-1751. [9] 马骊群, 曹铁泽, 王继虎, 等. 大尺寸坐标测量技术在大型部件装配应用中的若干问题[J]. 计测技术, 2013, 33(2):7-11. MA Liqun, CAO Tieze, WANG Jihu, et al. Discussion on inspecting the assembling components by using large volume metrology instruments[J]. Metrology & Measurement Technology, 2013, 33(2):7-11. [10] 卞和方, 张书毕, 李益斌, 等. 考虑公共点误差的坐标系转换方法研究[J]. 海洋测绘, 2009, 29(2):39-41, 48. BIAN Hefang, ZHANG Shubi, LI Yibin, et al. Research on coordinate systems transformation considering the common points error[J]. Hydrographic Surveying and Charting, 2009, 29(2):39-41, 48. [11] 曾安敏, 明锋. 顾及框架点坐标误差的三维基准转换严密模型[J]. 测绘学报, 2017, 46(1):16-25. DOI:10.11947/j.AGCS.2017.20160295. ZHEN Anmin, MING Feng. The rigorous model for similarity transformation under intra-frame and inter-frame covariance[J]. Acta Geodaetica et Cartographica Sinica, 2017, 46(1):16-25. DOI:10.11947/j.AGCS.2017.20160295. [12] 周跃寅, 潘国荣. 公共点分布对坐标转换精度的影响[J]. 大地测量与地球动力学, 2013, 33(2):105-109. ZHOU Yueyin, PAN Guorong. Accuracy of coordinate transfer influenced by different distributions of common points[J]. Journal of Geodesy and Geodynamics, 2013, 33(2):105-109. [13] 钟成, 李卉, 李宗华, 等. 几何条件与变换模型对坐标变换质量的影响[J]. 测绘学报, 2010, 39(6):642-648. ZHONG Cheng, LI Hui, LI Zonghua, et al. Affects of geometrical conditions and transformation methods on quality of coordinate transformation[J]. Acta Geodaetica et Cartographica Sinica, 2010, 39(6):642-648. [14] 吴祖海, 罗伟钊, 李军. 坐标转换中公共点粗差定位与降低粗差点影响方法研究[J]. 大地测量与地球动力学, 2014, 34(1):118-122. WU Zuhai, LUO Weizhao, LI Jun. On position of gross errors of common points in coordinate transformation and reducing influence of gross errors[J]. Journal of Geodesy and Geodynamics, 2014, 34(1):118-122. [15] 李德仁, 袁修孝. 误差处理与可靠性理论[M]. 武汉:武汉大学出版社, 2002. LI Deren, YUAN Xiuxiao. Error processing and reliability theory[M]. Wuhan, Wuhan University Press, 2002. [16] 姚宜斌, 黄书华, 张良, 等. 求解三维坐标转换参数的整体最小二乘新方法[J]. 武汉大学学报(信息科学版), 2015, 40(7):853-857. YAO Yibin, HUANG Shuhua, ZHANG Liang, et al. A new method of TLS for solving the parameters of three-dimensional coordinate transformation[J]. Geomatics and Information Science of Wuhan University, 2015, 40(7):853-857. [17] SHEN Yunzhong, LI Bofeng, CHEN Yi. An iterative solution of weighted total least-squares adjustment[J]. Journal of Geodesy, 2011, 85(4):229-238. [18] 方兴, 曾文宪, 刘经南, 等. 三维坐标转换的通用整体最小二乘算法[J]. 测绘学报, 2014, 43(11):1139-1143. DOI:10.13485/j.cnki.11-2089.2014.0193. FANG Xing, ZENG Wenxian, LIU Jingnan, et al. A general total least squares algorithms for three dimensional coordinate transformation[J]. Acta Geodaetica et Cartographica Sinica, 2014, 43(11):1139-1143. DOI:10.13485/j.cnki.11-2089.2014.0193. [19] 袁庆, 楼立志, 陈玮娴. 加权总体最小二乘在三维基准转换中的应用[J]. 测绘学报, 2011, 40(S1):115-119. YUAN Qing, LOU Lizhi, CHEN Weixian. The application of the weighted total least-squares to three dimensional-datum transformation[J]. Acta Geodaetica et Cartographica Sinica, 2011, 40(S1):115-119. [20] 陈义, 陆珏. 以三维坐标转换为例解算稳健总体最小二乘方法[J]. 测绘学报, 2012, 41(5):715-722. CHEN Yi, LU Jue. Performing 3D similarity transformation by robust total least squares[J]. Acta Geodaetica et Cartographica Sinica, 2012, 41(5):715-722. [21] 葛旭明, 伍吉仓. 三维基准转换的约束加权混合整体最小二乘的迭代解法[J]. 武汉大学学报(信息科学版), 2012, 37(2):178-182. GE Xuming, WU Jicang. Iterative method of weight constraint total least-squares for three-dimensional datum transformation[J]. Geomatics and Information Science of Wuhan University, 2012, 37(2):178-182. [22] YAO Y Z. 人工智能方法在大地测量坐标转换中的应用研究[D]. 北京:中国地质大学, 2017. YAO Y Z. Research on the application of some artificial intelligence techniques to geodetic coordinate transformation[D]. Beijing:China University of Geosciences, 2017. [23] GOPE D, GOPE P C, THAKUR A, et al. Application of artificial neural network for predicting crack growth direction in multiple cracks geometry[J]. Applied Soft Computing, 2015, 30:514-528. [24] SHU Chanfang, LI Fei. An iterative algorithm to compute geodetic coordinates[J]. Computers & Geosciences, 2010, 36(9):1145-1149. [25] COTTLE R, JOHNSON E, WETS R, et al. Dantzig (1914-2005)[J]. Notices of the American Mathematical Society, 2007, 54(3):344-362. [26] NELDER J A, MEAD R. A simplex method for function minimization[J]. The Computer Journal, 1965, 7(4):308-313. [27] 宋星原, 舒全英, 王海波, 等. SCE-UA、遗传算法和单纯形优化算法的应用[J]. 武汉大学学报(工学版), 2009, 42(1):6-9, 15. SONG Xingyuan, SHU Quanying, WANG Haibo, et al. Comparison and application of SCE-UA, genetic algorithm and simplex method[J]. Engineering Journal of Wuhan University, 2009, 42(1):6-9, 15. |