[1] 冯文灏. 工业测量[M]. 武汉:武汉大学出版社, 2004. FENG Wenhao. Industrial measurement[M]. Wuhan:Wuhan University Press, 2004. [2] 李明, 于冀平. 几何量工业测量的现状与发展[J]. 仪器仪表学报, 2017, 38(12):2959-2971. LI Ming, YU Jiping. Status and development of geometric measurement in industry[J]. Chinese Journal of Scientific Instrument, 2017, 38(12):2959-2971. [3] 何学军. 几何量数字化测量方法与装备的现状及发展趋势[J]. 计测技术, 2021, 41(2):35-40. HE Xuejun. Present situation and development trend of geometric digital measurement method and measuring equipment[J]. Metrology & Measurement Technology, 2021, 41(2):35-40. [4] BÖSEMANN W. Industrial photogrammetry:challenges and opportunities[C]//Proceedings of 2011 SPIE Volume 8085, Videometrics, Range Imaging, and Applications XI. Munich, Germany:SPIE, 2011. [5] BÖSEMANN W. Industrial photogrammetry-accepted metrology tool or exotic niche[J]. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 2016, XLI-B5:15-24. [6] 黄桂平. 数字近景工业摄影测量理论、方法与应用[M]. 北京:科学出版社, 2016. HUANG Guiping. Theory, method and application of digital close range industrial photogrammetry[M]. Beijing:Science Press, 2016. [7] BURGE J H, SU Peng, ZHAO Chunyu, et al. Use of a commercial laser tracker for optical alignment[C]//Proceedings of 2007 SPIE Volume 6676, Optical System Alignment and Tolerancing. San Diego, California:SPIE, 2007. [8] 黄祚继, 钱海明, 张蕊, 等. 近景摄影测量影像匹配方法研究与应用[M]. 南京:河海大学出版社, 2017. HUANG Zuoji, QIAN Haiming, ZHANG Rui, et al. Research and application of close range photogrammetry image matching method[M]. Nanjing:Hehai University Press, 2017. [9] 张祖勋. 数字摄影测量与计算机视觉[J]. 武汉大学学报(信息科学版), 2004, 29(12):1035-1039, 1105. ZHANG Zuxun. Digital photogrammetry and computer vision[J]. Geomatics and Information Science of Wuhan University, 2004, 29(12):1035-1039, 1105. [10] 王文颖. 工程与近景摄影测量[M]. 北京:地质出版社, 1994. WANG Wenying. Engineering and close range photogram-metry[M]. Beijing:Geological Publishing House, 1994. [11] 丁宭辋, 刘友光, 张松波. 工程与工业摄影测量[M]. 武汉:中国地质大学出版社, 1995. DING Qunwang, LIU Youguang, ZHANG Songbo. Engineering and industrial photogrammetry[M]. Wuhan:China University of Geosciences Press, 1995. [12] 郑顺义, 何源, 徐刚, 等. 三维点云数据实时管理的Hash map方法[J]. 测绘学报, 2018, 47(6):825-832. DOI:10.11947/j.AGCS.2018.20170619. ZHENG Shunyi, HE Yuan, XU Gang, et al. Hash map method of 3D point cloud data for real-time organizing[J]. Acta Geodaetica et Cartographica Sinica, 2018, 47(6):825-832. DOI:10.11947/j.AGCS.2018.20170619. [13] HE Yuan, ZHENG Shunyi, ZHU Fengbo, et al. Real-time 3D reconstruction of thin surface based on laser line scanner[J]. Sensors, 2020, 20(2):534. [14] MEYNANTS G. Global shutter imagers for industrial applications[C]//Proceedings of 2014 SPIE. Volume 9141, Optical Sensing and Detection III. Brussels, Belgium:SPIE, 2014. [15] HUBBS W O. Refurbishable retro-reflective photogrammetric target:United States, 7698826[P]. 2008-01-28. [16] LEPETIT V, MORENO-NOGUER F, FUA P. EPnP:An accurate O(n) solution to the PnP problem[J]. International Journal of Computer Vision, 2009, 81:155. [17] SANTOS P, STORK A, BUAES A, et al. PTrack:Introducing a novel iterative geometric pose estimation for a marker-based single camera tracking system[C]//Proceedings of 2006 IEEE Virtual Reality Conference (VR 2006). Alexandria, VA, USA:IEEE, 2006:143-150. [18] WU Qian, LU Jinyan, ZOU Wei, et al. Path planning for surface inspection on a robot-based scanning system[C]//Proceedings of 2015 IEEE International Conference on Mechatronics and Automation (ICMA). Beijing, China:IEEE, 2015:2284-2289. [19] 冯其强, 李广云, 李宗春. 数字工业摄影测量技术及应用[M]. 北京:测绘出版社, 2013. FENG Qiqiang, LI Guangyun, LI Zongchun. Digital industrial photogrammetry technology and application[M]. Beijing:Surveying and Mapping Press, 2013. [20] 顾文文. 基于逆向工程的船舶曲面数字化设计方法研究[D]. 大连:大连理工大学, 2019. GU Wenwen. Research on digital design method of ship surface based on reverse engineering[D]. Dalian:Dalian University of Technology, 2019. [21] 戚明轩, 刘震磊, 兆尔波, 等. 某型航空发动机叶片逆向工程方法研究[J]. 航空精密制造技术, 2021, 57(1):13-16. QI Mingxuan, LIU Zhenlei, ZHAO Erbo, et al. Research on reverse engineering method of aeroengine blade[J]. Aviation Precision Manufacturing Technology, 2021, 57(1):13-16. [22] 丁骏. 重型燃气轮机高负荷压气机气动设计方法及流动控制机理[D]. 哈尔滨:哈尔滨工业大学, 2018. DING Jun. On the aerodynamic design method and flow control mechanism of highly loaded compressors in a heavy duty gas turbine[D]. Harbin:Harbin Institute of Technology, 2018. [23] 彭燕军, 王霜, 彭小欧. UG、Imageware在逆向工程三维模型重构中的应用研究[J]. 机械设计与制造, 2011(5):85-87. PENG Yanjun, WANG Shuang, PENG Xiaoou. Applied research of UG and Imageware in 3-D model reconstruction of reverse engineering[J]. Machinery Design & Manufacture, 2011(5):85-87. [24] 徐进军. 工业测量技术与数据处理[M]. 武汉:武汉大学出版社, 2014. XU Jinjun. Industrial measurement technology and data processing[M]. Wuhan:Wuhan University Press, 2014. [25] JORDAN M. Scanner enables fast, flexible inspection[J]. Modern Machine Shop, 2009, 81(12):100-103. [26] CHEN Jiaying, HUANG Xiaoming, ZHENG Binshuang, et al. Real-time identification system of asphalt pavement texture based on the close-range photogrammetry[J]. Construction and Building Materials, 2019, 226:910-919. [27] QIN Chen, GAN Yahui, DAI Xianzhong. Sensor calibration and trajectory planning in 3D vision-guided robots[C]//Proceedings of 2019 Chinese Control and Decision Conference (CCDC). Nanchang, China:IEEE, 2019:5621-5626. |